General instructions
• Carefully read the information contained
in this instruction booklet.
• After hot water tank installation, inform
the user regarding its operation and
provide this manual, which is an integral
and essential part of the BSF HP
and must be kept with care for future
reference.
• Installation and maintenance must be
carried out by professionally qualified
personnel, according to current regula-
tions and the manufacturer's instructions.
Do not carry out any operation on the
sealed control parts.
• Incorrect installation or inadequate main-
tenance can result in damage or injury.
The Manufacturer declines any liability for
damage due to errors in installation and
use or failure to follow the instructions.
• Before carrying out any cleaning or
maintenance operation, disconnect
the unit from the supply mains via the
system switch and/or the special shut-
off devices.
• In case of a fault and/or poor operation,
deactivate the unit and do not try to
repair it or directly intervene. Contact
professionally qualified personnel. Any
repair/replacement of the products must
only be carried out by qualified personnel
using genuine parts. Failure to comply
with the above can compromise the
safety of the unit.
• This unit must only be used for its
intended purpose. Any other use is
deemed improper and therefore haz-
ardous.
40
EN
• The packing materials are potentially
hazardous and must not be left within
the reach of children.
• The unit must not be used by people
(including children) with limited physical,
sensory or mental capabilities or without
experience and knowledge of it, unless
instructed or supervised in its use by
someone responsible for their safety.
• The unit and its accessories must be
appropriately disposed of, in compliance
with current regulations.
• The images in this manual are a simplified
representation of the BSF HP. In
this representation there may be slight
and insignificant differences with the
BSF HP supplied.
Cod. 3540000190 - Rev. 06 - 06/2023
BSF HP