Lindy 38349 Manual De Usuario página 3

User Manual
Introduction
Thank you for purchasing the 70m Cat.6 HDMI 4K60, IR & RS-232 HDBaseT Extender with ARC. This
product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2-year
warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and
retain it for future reference.
The Cat.6 HDMI 4K60, IR & RS-232 HDBaseT Extender with ARC is a high-performance Extender for
extending HDMI signals over long distances via Cat.6 network cable.
HDBaseT is a globally recognised standard for high quality distribution of AV content and other
technologies, including power and control, over longer distances via low cost Cat.6 or above cable.
Supporting resolutions up to 4K Ultra HD, video can be viewed in stunning clarity, while additional support
for HDR (High Dynamic Range) allows content to be displayed with enhanced brightness, greater contrasts
of blacks and whites and a much wider colour gamut. This provides a reliable solution for creating eye-
catching digital signage in retail, immersive displays at events or engaging setups in larger conference
rooms or lectures halls.
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
Please Note: The quoted lengths and resolutions are possible with a direct connection between
Transmitter and Receiver using good quality Cat.6 cable. Using a different cable type, introducing
couplers, wall plates or patch panels may result in a reduction of possible distances.
Package Contents
HDBaseT HDMI Extender, Transmitter

HDBaseT HDMI Extender, Receiver

2 x 3-Pin Terminal Block

IR Emitter Cable, 1.5m

IR Receiver Cable, 1.5m

4 x Mounting Ears & 8 x Screws

24VDC 1A Multi-country Power Supply (UK, EU, US & AUS), Screw Type DC Jack: 5.5/2.1mm

Lindy Manual

Features
Supports resolutions up to 3840x2160@60Hz 4:4:4 8bit, with additional support for HDR, HDR10,

HDR10+, Dolby Vision and HLG
Audio Pass-through of all HDMI audio formats including Dolby Atmos & DTS:X

ARC (Audio Return Channel) support with additional digital audio connection and dip-switch

management on the front panel of the Receiver
PoC (Power over Cable) support, requiring a power supply connection from only one side of the

installation
Advanced EDID management with dip-switch on the front panel of the Transmitter

Bi-directional IR Control (20-60KHz) of equipment via the extender

RS-232 Pass-through

Screw Type DC Jack for a secure power connection

English