Using The Included Accessories - Miele S 8000 Manual De Uso Y Manejo

Always use the floor tool with the
bristles raised to clean floors with
very deep joints or gaps.
AirTeQ floor tool (see fig. 8)
This floor tool is specially designed to
achieve good cleaning results with low
energy consumption. It is especially
aerodynamic and powerful.
,
If the floor tool is difficult to move
across the carpeting reduce the
suction power.
Inserting batteries into the LED handle
(see fig. 9 + 10)
a Loosen the screws on the cover.
b Press down on both sides of the
cover to remove.
c Take out the battery holder and insert
the three batteries supplied making
sure they are inserted correctly.
d Replace the batter holder in the
direction of the arrows on the holder
and battery compartment, so that
both line up.
e Replace the cover and tighten the
screws.
Using the included
accessories (see fig. 11)
The following accessories are included:
a Crevice nozzle
For cleaning in folds, crevices and
corners.
b Dust brush with natural bristles
For cleaning moldings, ornate,
carved or especially sensitive items.
The brush head can be swiveled to
the optimal cleaning position.
c Upholstery tool
For cleaning upholstery, mattresses,
cushions, curtains, covers, etc.
Certain models come with one of the
following accessories that are not shown.
– Powerbrush
– Turbobrush
These vacuum cleaners have separate
operating instructions for the
corresponding accessory.
Removing the accessories (see fig. 12)
^ Press the release button.
The accessory compartment opens.
^ Take out the accessory needed.
^ Close the accessory compartment by
pressing on the lid.
Standard floor brush (see fig. 13)
Also suitable for vacuuming stairs.
,
For your own safety, always
vacuum stairs from bottom to top.
en
11