Bissell POWERFILTER 1793 Serie Manual Del Usuario página 6

Operations: Power On & Settings
1
To power ON, step on
the RED Power Switch
Pedal located near the
bottom on the back
side. Push the lower
Handle Recline Pedal
two times for an even
lower recline.
Tools
NOTE:
Crevice Tool and Extension Wand come pre-installed on the back of the vacuum.
The Pet Hair Eraser Tool does not store on the vacuum. Connect the hose to use with
vacuum or you can use without the hose connection.
6
www.BISSELL.com
2
Turn dial on foot to adjust to 1 of 5 height adjustments.
NOTE: For optimal cleaning, adjust to the lowest
practical setting. If your vacuum is difficult to push, or is
pushing larger debris, adjust to the next higher setting.
To attach any of
the included tools,
remove the lower
lower wand base
from the foot of the
vacuum and from
both hose clips.
Insert the desired
tool firmly into the
hose end.
Crevice Tool
Use in narrow spaces
or along baseboards
and edges.
Extension Wand
Attach with desired
tool for longer reach.
Lowest Setting: For low pile
carpet and bare floors.
Medium Setting: For medium
pile carpet.
Highest Setting: For high pile
and most shag carpet. Adjust to
high setting if difficult to push.
Pet TurboEraser™ Tool
Remove tool by pulling
away and downwards
from vacuum. For best
use, press the brush
gently down and pull
towards you in raking
motion; too much
pressure will cause
brush to stop rotating.
Pet Hair Eraser™ Tool
Move sweeper from
side to side. When you
hear "click", reverse the
motion. Clean inside
the dirt bin by pressing
on the side tabs gently
to open. You can use a
damp cloth or towel to
clean excess dirt and
any excess hair.