Hilti GX 2 Manual De Instrucciones Original página 23

3 Description
3.1 Overview of the product
3.2 Intended use
The product described is a gas-actuated fastening tool. It is designed to drive suitable fasteners (nails) into
concrete, steel, concrete-block masonry, sand-lime block, rendered masonry and other materials suitable
for use of the direct fastening technique.
The fastening tool, gas can, battery and fasteners form a technical unit. This means that trouble-free
fastening with this fastening tool can be ensured only when it is used together with the fasteners, gas cans
and batteries specially manufactured for it by Hilti. The fastening and application recommendations made
by Hilti apply only when these conditions are observed.
The fastening tool is for hand-held use only.
▶ Use only the Hilti B12/2.6 and respectively the B 12­30 Li ion battery for this product.
▶ Use only Hilti battery chargers of the C 4/12-50 series for charging these batteries.
3.3 Items supplied
Gas-actuated fastening tool with fastener guide, 2 batteries, charger, toolbox and operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4 Fastener guide
The fastener guide holds the studs or, respectively, guides the nails and, when the tool is actuated, thus
directs the fasteners into the supporting material at the desired position.
*2126831*
1
@
;
=
%
&
(
)
+
§
/
:
∙
$
£
2126831
Fastener guide
Slider for fastener driving depth adjustment
and for releasing the fastener guide
Belt hook
Safety trigger
Magazine lockbutton
Support leg
Magazine
Nail pusher
Cooling air slots
Gas can compartment
Battery release button
Battery charge status display
Gas can status indicator button
Gas can status indicator
English 19