Delta 36-5000 T2 Manual De Instrucciones página 46

DUST CHUTE CLEAN OUT
1.
Remove the hex screw located in the back of the dust
chute, using the supplied 3/16 inch Two-Way Allen Wrench
(L Shape) . See Figure 61.
HP23
2.
Rotate the dust port downward, and clear any sawdust or
woodchips that may be inside the dust chute. See Figure
62.
3.
When finished, rotate the dust port back to its original
position and secure the hex screw back in place.
MAINTENANCE
46
Figure 61
Figure 62