Dräger Vista 120 Gateway Manual Del Usuario página 42

Configuration
The information of device connected to Gateway
can be viewed on the Device Manage interface,
while the device that Authorized is checked is
available to transfer data through Gateway.
Gateway will neglect the inbound data from the
device unchecked.
The Device Manage interface displays in paging.
Therefore, the modification performed on the page
must be saved to ensure its effectiveness. When
turning page a prompt for saving the modification
on the page will pop up. Click Yes to save the
modification on the page, click No to cancel the
modification.
Network Configuration
Configure Local Listen and Channel Config in the
Network Configuration Manage.
NOTE
Since MLLP does not define data encryption
methods, although Gateway uses a whitelist to
protect data security, we still recommend
confirming that the network between Gateway
and HIS is secure.
42
Click Refresh key to refresh the configuration, and
click Confirm key to save the modification, as
shown in the following figure. Click Yes.
Vista 120 Gateway Instructions for use