Dräger Vista 120 Gateway Manual Del Usuario página 51

 Certificate Manage: When the built-in
digital certificate expires or the user does
not want to use the built-in digital certificate,
this function can be used to replace the
digital certificate used for encrypted
communication between the gateway and
the monitor.
NOTE
After certificate configuration is changed, restart
the gateway to make the configuration take effect.
If the certificate is installed on the system, the
Config Tool will load the valid period of certificate
automatically when it is started. Click Browse to
select the valid certificate to be installed, input the
corresponding password in the password box (if the
selected certificate is not configured with password,
the password is null, and the user need not to input
the password).
CAUTION
Gateway supports digital certificates in p12
format, and a password is recommended for the
certificate file.
About
The About interface shows the information of
Vaista 120 Gateway, including Software Name,
Version Information, Program Version and
Protocol. With regard to the program version in the
following figure, the actual released version shall
prevail.
Vista 120 Gateway Instructions for use
CAUTION
The certificates of nodes involved in TLS
communication need to be replaced
synchronously, otherwise it may cause
communication abnormalities, please consult with
Draeger technical service for details
1) CA Certificate: Required When the server
uses a self-signed certificate, but Windows
does not trust the CA that issued the certificate.
2) Server Certificate: Digital certificate used
when the Gateway communicates with the
monitor, and is installed automatically when
Gateway runs at first time.
3) Valid Period: the valid period of the installed
certificate.
4) Certificate File: showing the current certificate
file, and showing new certificate when the user
browsing new certificate.
5) Password: The password of the private key in
the digital certificate
6) Delete: deleting the certificate and certificate
file installed on the operation system.
7) Revert: reverting to the built-in certificate of the
application.
8) Save: copy the newly selected certificate file,
and simultaneously saving the password if the
certificate is configured with password.
Configuration
51