Dräger Vista 120 Gateway Manual Del Usuario página 52

Configuration
Restart Gateway
The Gateway state is displayed at the bottom of
Config Tool interface. To configure the network in
Network Configuration interface of Config Tool,
click Restart button and click Yes to restart the
gateway, the gateway state turns from Running to
Stopped.
NOTE
When Gateway is in Running state, Gateway can
receive or send data, When it is in Stopped state,
Gateway cannot receive or send data.
52
One minute after the gateway restarts successfully,
the gateway state turns to Running. Gateway will
run under the configuration done.
Then Gateway is restarted, the gateway state turns
to Running. The restart interval must be more than
1 minute, and Gateway will run under the
configuration the user has modified after restart.
NOTE
The user can start Gateway manually if Gateway
does not start automatically for long time.
Vista 120 Gateway Instructions for use