Amprobe MEGATEST 1000 Manual Del Propietário página 21

If the terminal voltage is higher than
30V, the instrument will not take the
test, displays the screen alongside for
5 seconds after which, it shows the
default screen relative to the MΩ test
under AUTO mode.
THIS RESULT CANNOT BE SAVED.
SAVE
If the instrument gets overheated,
tests cannot be carried out and the
message alongside is displayed. Wait
until the initial screen is back in order
to proceed with measurements.
Message "hot":
the instrument got overheated.
THIS RESULT CANNOT BE SAVED.
SAVE
o A
VOL
o
20
ATTENTION:
R
the test was not
ISO
carried out.
Check that the
circuit is not
AG
energised.
R
ISO