mabe JEM7600 Manual Del Usuario página 54

2.3 Installing the backguard (see features by model chart
at end of the manual).
1
Unpack the backguard.
Place the backguard on the
2
cooktop and make sure that the
holes of both pieces match, so
the backguard is correctly seated
(see picture 1).
Place the 3 round head screws
3
at the lower face of both,
backguard and cooktop, firmly
tighten with the nuts (see
picture 1). Use pliers.
Place the metallic reinforcements
4
in position (see picture 2) and
slide them to their final location.
5
Place 1 Philips head screw on
each support and plastic spacer,
at the bottom of the backguard
(see picture 2).
Place 1 round head screw on
6
each support, at the upper face
of backguard and cooktop (see
picture 1), firmly tighten with
the nuts. Use pliers.
2.4 Connecting the gas supply
Make sure your home has a gas pressure regulator that provides the correct
pressure.
DO NOT USE PLASTIC HOSES TO CONNECT THE GAS
SUPPLY AS THEY COULD LEAK, EVEN BRAIDED FLEXIBLE
STEEL HOSES.
54
Picture 1
Picture 2