Bosch Performance 0 275 007 031 Manual Original página 29

Displaying/Adapting Basic Settings
The basic settings can be displayed and changed regardless
of whether the on-board computer is inserted in the holder 4
or not.
To access the basic settings menu, press and hold the
"RESET" button 6 and the "i" button 1 until "Configuration"
is displayed in text indication d.
To switch between the basic settings, press button "i" 1 on
the on-board computer repeatedly until the required basic
setting is displayed. If the on-board computer is inserted in
the holder 4, you can also press button "i" 11 on the operat-
ing unit.
To change the basic settings, press the On/Off button 5 next
to indication "–" to reduce or scroll down, or the lighting but-
ton 2 next to indication "+" to increase or scroll up.
If the on-board computer is inserted in the holder 4, it is also
possible to change using buttons "–" 12 and "+" 13 on the
operating unit.
To exit the function and save a changed setting, press the
"RESET" button 6 for 3 s.
The following basic settings are available:
Error Code Indication
The components of the eBike system are continuously and au-
tomatically monitored. When an error is detected, the respec-
tive error code is indicated in text indication d.
Press any button on the on-board computer 3 or on the oper-
ating unit 10 to return to the standard indication.
Code Cause
410 One or more buttons of the on-board
computer are blocked.
414 Connection problem of the operat-
ing unit
418 One or more buttons of the operat-
ing unit are blocked.
422 Connection problem of the drive unit Have connections and contacts checked.
423 Connection problem of the eBike
battery pack
424 Communication error among the
components
426 Internal time-out error
430 internal battery pack of the on-board
computer is empty
440 Internal error of the drive unit
450 Internal software error
490 Internal error of the on-board
computer
Bosch eBike Systems
– "Clock": The current time can be set here. Pressing and
holding the setting buttons fast-forwards the setting speed.
– "Wheel circum.": You can change this value pre-set by the
manufacturer by ± 5 %. This value is displayed only when
the on-board computer is in the holder.
– "English": You can change the language of the text indica-
tions. You can choose between German, English, French,
Spanish, Italian, Dutch and Danish.
– "Unit km/mi": The speed and distance can be displayed
either in kilometres or miles.
– "Time format": The time can be displayed either in the
12 hour or 24 hour format.
– "Shift recom. on/off": You can switch the indication of a
shift recommendation on and off.
– "Power-on hours": Indicates the total travel duration with
the eBike (not changeable).
– "Displ. vx.x.x.x": This is the software version of the dis-
play.
– "DU vx.x.x.x": This is the software version of the drive
unit. This value is displayed only when the on-board com-
puter is in the holder.
– "Bat vx.x.x.x": This is the software version of the battery
pack. This value is displayed only when the on-board com-
puter is in the holder.
Depending on the type of error, the drive unit is automatically
shut off, if required. Continued travel without assistance from
the drive unit is possible at any time. However, have the eBike
checked before attempting new trips.
 Trouble-shooting actions may be performed by the
owner except those explicitly noted as "Contact your
Bosch eBike dealer".
Corrective Measure
Check if any buttons are blocked, e.g. from dirt or debris. Clean the
buttons, if required.
Have connections and contacts checked.
Check if any buttons are blocked, e.g. from dirt or debris. Clean the
buttons, if required.
Have connections and contacts checked.
Have connections and contacts checked.
Restart the system. If the problem persists, contact your Bosch eBike dealer.
Charge the on-board computer (in the holder or via the USB port).
Restart the system. If the problem persists, contact your Bosch eBike dealer.
Restart the system. If the problem persists, contact your Bosch eBike dealer.
Have the on-board computer checked.
English–5
0 276 001 SPI | (19.2.15)