Fig. 2
3. Insert the trigger gun holder onto the bucket (Fig. 3).
Fig. 3
Trigger
gun holder
4. Align the water inlet on the base unit with the outlet on
the bottom of the bucket, and seat the bucket on the
base unit. Check alignment to ensure a proper seal and
connection (Fig. 4).
Fig. 4
Bucket lid
Bucket
Bucket outlet
Base unit
5. Flip up the buckles on the base unit and latch to bucket.
Press down on the buckle ends to lock the bucket to the
base unit (Fig. 5).
Fig. 5
Bucket buckle
m
WARNING!
unit, do not lift the pressure washer by the handle. Instead, use
the tow handle to pull the pressure washer unit along on its
wheels (Fig. 6).
Fig. 6
8
Bucket
1. Flip up
2. Press the end
When the water bucket is fixed on the base
Water inlet
Base unit