Publicidad
Idiomas disponibles
Idiomas disponibles
6. Take the spray wand and align the two tabs with your
trigger gun. Once aligned, push the spray wand firmly into
the trigger gun, twist counter-clockwise to lock into place
(Fig. 7).
Fig. 7
Trigger gun
7. Unlock the lock latch by sliding it down, and insert the
high pressure hose into the high pressure hose connection
on the end of the trigger gun. Slide the latch back to lock
the hose in place (Figs. 8 – 9).
Fig. 8
High-pressure hose
Fig. 9
High-pressure hose
Spray wand
Lock latch
Lock latch
m
WARNING!
Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
8. Connect the high-pressure hose to the base unit by
inserting the other end into the water outlet. While pushing
firmly in on the hose, twist the outer collar clockwise until
tight to ensure a water-tight connection (Fig. 10).
Fig. 10
Water outlet
High-pressure
hose
Twist clockwise while
pressing firmly
9. Put the trigger gun with spray wand assembly on the gun
holder. Your pressure washer is ready for use (Fig. 11).
Fig. 11
9
Publicidad
