Publicidad
Idiomas disponibles
Idiomas disponibles
Maximum dynamic pressure variation according to ISO 80601-2-70:2015
AirSense 11 with HumidAir 11 tub and air tubing
Breath rate
Dynamic pressure variation (cm H
AirSense 11 with Side cover and air tubing
Breath rate
Dynamic pressure variation (cm H
Measurement system uncertainties
In accordance with ISO 80601-2-70:2015 the measurement uncertainty of the manufacturer's test equipment is:
For measures of flow:
For measures of static pressure:
For measures of dynamic pressure:
Note: ISO 80601-2-70:2015 stated accuracies and test results provided in this manual for these items already include the relevant
measurement uncertainty from the table above.
In accordance with ISO 80601-2-74:2017 the measurement uncertainty of the manufacturer's test equipment is
For measures of humidification output
Bluetooth
Technology used:
Connection types:
Frequency:
Max RF power output:
Operation range:
Cellular technology and regulatory compliance
Refer to the Cellular information guide in ResMed.com/downloads/devices
Humidifier
Maximum heater plate temperature:
Temperature cut-out (heater):
Maximum gas temperature (at mask)
1
The air flow for breathing produced by this therapy device can be higher than the temperature of the room. Under extreme
ambient temperature conditions (104ºF/40ºC) the device remains safe.
24
O [hPa])
2
O [hPa])
2
± 3.9 L/min
± 0.15 cm H
± 0.04 cm H
± 0.5 mg/L BTPS
Bluetooth Low Energy (BLE)
GATT
2400 to 2483.5 MHz
+4 dBm
10 m (Class 2)
154ºF (68ºC)
165ºF (74ºC)
≤ 106ºF (41ºC)
1
:
10 BPM
15 BPM
0.5
0.5
10 BPM
15 BPM
0.5
0.5
O (± 0.15hPa)
2
O (± 0.04hPa)
2
20 BPM
0.8
20 BPM
0.8
Publicidad
