Ego Power+ SNT2800 Manual Del Usuario página 10

CLEARING A CLOGGED DISCHARGE CHUTE
Hand contact with the rotating auger assembly inside the discharge chute is the most
common cause of injury associated with snow blowers. Never use your hand to clean
out the discharge chute.
To clear the chute:
◾
SHUT THE MOTORS OFF!
◾
Remove the battery pack(s) from the snow blower.
◾
Wait 10 seconds to be sure the auger assembly have stopping rotating.
◾
Always use a clean-out tool, not your hands. Always use the chute cleaning tool
which is attached to the machine as an accessory, do not use your hand.
MAINTENANCE AND STORAGE
◾
Check all bolts or fasteners at frequent intervals for proper tightness to be sure
the equipment is in safe working condition.
◾
Always refer to operator's manual for important details if the snow blower is to be
stored for an extended period of time.
◾
Maintain or replace safety and instruction labels, as necessary.
◾
Run the snow blower a few minutes after blowing snow to prevent freeze-up of
the auger assembly.
SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others
who may use this snow blower. If you lend this snow blower to someone else, also lend
these instructions to them to prevent misuse of the product and possibly injury.
10
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2800/SNT2800-FC