AGA Unicontrol Serie Manual De Instrucciones página 2

02 GB. Operating instruction for FLOWREG corresponding to EN 2503.
Operating instructions for Unicontrol
Cylinder Pressure Regulators corresponding
to EN ISO 2503.
These instructions are produced in accordance
with current regulations to ensure the safe opera-
tion of Cylinder Pressure Regulators. Specific
attention to these instructions will help to avoid
risks and loss of production as well as enhance
the reliability and durbility of these Cylinder Pres-
sure Regulators.
These instructions must be kept permanently at
hand in the workshop.
For safety instructions, also see paragraph
2; if in any doubt please consult the manu-
facturer.
1. Operation
1.1 Cylinder Pressure Regulator use in accordance
with current regulations.
Cylinder Pressure Regulators are designed to
reduce the respective cylinder pressure and to
ensure a constant outlet working pressure. They
are used with compressed gases, pressurised dis-
solved gases in cylinders and liquid gases having
a tilling pressure of up to a maximum of 200 bar.
bottles with a filling pressure amounting to maxi-
mum 200 bar.
1.2 Cylinder Pressure Regulator use, contrary to
current regulations:
Cylinder Pressure Regulators must not be used for
gases in a liquid state. Cylinder Pressure Regula-
tors must not be operated under temperatures of
-30°C or above +60•c.
Cylinder Pressure Regulators must not be used for
corrosive gases such as ethylamin, dimethylamin,
ammonia etc.
2. Safety instructions
All indications showing this exclamation mark
are important safety instructions.