AGA Unicontrol Serie Manual De Instrucciones página 3

2.1 Cylinder Pressure Regulator comply with all
current relevant technical regulations and meet
all existing standards.
2.2 Under no circumstances must the Cylinder
Pressure Regulator be modified or tampered with
without the written consent of the manufacturer.
2.3 Intermediary connections between the Cylin-
der valve and the Cylinder Pressure Regulator are
strictly prohibited.
Designations corresponding to ISO 2503
1 Cylinder valve
3 High pressure gauge
5 Pressure adjustment screw
7 Safety relief valve
GB. Operating instruction for FLOWREG corresponding to EN 2503.
2.4 Incorrect use may endanger the operator and
other personnel, damage to the Cylinder Pressure
Regulator and Installation may also result.
2.5 Regulations to be adhered to: In Germany:
UVV (~ Instructions to avoid accidents: Welding.
Cutting and Associated procedure"s VGB 12). EN
585 Cylinder Pressure Regulator.mark are impor-
tant safety instructions.
2 Inlet stem with screw or yoke
4 Low pressure gauge/or flowmeter
where applicable
6 Outlet nipple
8 Regulating orifice/throttle, for Cylin-
der Pressure Regulators having flow-
meter gauge only
03
2