Publicidad
Idiomas disponibles
Idiomas disponibles
Usage
Preprogrammed Pads
Oven contains two menus with 10 preset number pads
each. Heating times and power levels can be adjusted to
fit menu requirements.
Number pads come preprogrammed from factory to
operate at full power for following times. MENUS 1 and 2
pads are programmed identically at factory.
Pad
1
2
3
4
5
6
7
8
9
10
Instructions are written for factory programmed ovens.
Ovens that are reprogrammed may respond differently
than described below.
Cook Levels and Hold
Set oven to cook using between 10 and 100 percent
cooking power. If food requires time between cooking
cycles without microwave energy, use HOLD pad.
When HOLD pad is used, oven operates for cooking
stage without producing microwave energy.
Interrupting Operation
• Open oven door to interrupt operation. Blower
continues to operate. Close door and press
START pad to resume oven operation and
countdown timing.
If preset pad is pushed immediately after door is opened
and closed, a slight delay occurs before oven starts and
timing countdown begins.
• Press RESET pad to interrupt operation. Display
continues to show countdown time. Press START
pad to resume oven operation and countdown
timing.
Cooking Time
10 seconds
20 seconds
30 seconds
45 seconds
1 minute
1 1/2 minutes
2 minutes
3 minutes
4 minutes
5 minutes
Continuing after Pause
If oven is programmed to pause in middle of cooking
cycle, oven signals 3 times and shows "PAUS". When
oven pauses, open door, manipulate food, close door, and
press START pad to continue operation.
• If oven fan is operating during pause, press START
pad to resume operation, without opening oven
door or manipulating food.
• If oven fan is not operating during pause, open oven
door and press START pad to resume operation.
Cancelling Mistakes
• If oven is not operating, press RESET pad to clear
display.
• If oven is operating, press RESET pad once to stop
oven, then again to clear display.
7
Publicidad
