Fresh Mode; Final Operation Signal; Peel Counter Function - Zummo Z14 NATURE Manual De Usuario

 Switch on the machine. Now the SELECT button is locked and the display will show Lock.
To unlock the SELECT button, repeat exactly the same operation.

6.5. FRESH MODE

Repeat the 7.2. section process by entering the code 3003.
When you turn the machine on again (you will first see the programme version and then code 3003)
the ON button will have been disabled and machine is now ready to select the number of oranges you
want to squeeze and start operating with the tap of the Fresh cabinet.
In this operating mode, the selector can be programmed to 0 oranges. This way it is possible to empty
the entire tank, since the machine will not squeeze more oranges when the tap is activated.
TO TURN ON THE NORMAL OPERATING MODE
Repeat the process by entering the code 1001. This will enable the ON button and the machine will
start working when you press the ON button or with connector.

6.6. FINAL OPERATION SIGNAL

To activate the beep signal, repeat the 7.2. section process by entering the code 8548. After
connecting the machine when the machine finish a service the machine beeps.
TO DEACTIVATE THE BEEP SIGNAL
Repeat the process by entering the code 8549.

6.7. PEEL COUNTER FUNCTION

The machine has an automatic system for warning when the peel collection bin is full. If you want to
activate this function, please proceed as follows:
 Turn off the machine's power switch.
 With the machine off, press SELECT, and continue pressing while turning the power switch
back on. Keep pressing for four seconds until you see the containers/chutes appear on the
display panel alongside a three-digit figure.
 Once this screen appears you need to enter the number of peels the machine needs to produce
before the alarm goes off. By pressing SELECT intermittently, the number of peels will continue
to increase. If, on the other hand, you press SELECT continuously for more than 2 seconds, the
number will start reducing.
 Once the number of peels has been selected, press STOP and that quantity will be held in the
machine's memory.
32