Publicidad
Idiomas disponibles
Idiomas disponibles
Components
The shipping carton for your painting system contains the
following:
• Suction tube and return tube
• Pump cleaning adapter
• Spray gun with filter
• Spray tip assembly
•
50', 1/4" diameter pressure hose
• Instruction manual
ON/OFF Switch .............................. The ON/OFF switch turns the power to the sprayer on and off (O=OFF, l=ON).
Suction tube ................................... Fluid is drawn through the suction tube into the pump.
Fluid Section .................................. A piston in the fluid section moves up and down to create the suction that draws fluid through the
Spray Gun ...................................... The spray gun controls the delivery of the fluid being pumped.
Spray Hose ..................................... The spray hose connects the gun to the pump.
Return Tube ................................... Fluid is sent back out through the return tube to the original container when PRIME/SPRAY knob is
Pump Cleaning Adapter ................ The adapter allows you to attach a garden hose to the suction tube for easy cleanup (latex
PRIMe/SPRAy Knob ...................... The PRIME/SPRAY knob directs fluid to the spray hose when set to SPRAY or the return tube
Pressure Control Knob ................ The pressure control knob regulates the amount of force the pump uses to push the fluid.
Sprayer Filter ................................. This filters the spray material prior to it reaching the spray gun to help prolong spray tip life.
Sureflo™ valve............................... The Sureflo™ valve is designed to keep the inlet valve open and from sticking due to dried
Manual breaker .............................. In case the sprayer shuts down due to an electrical overload, unplug the power cord and press the
Capacity:
Up to .48 gallon (1.81 liters) / minute
Power source:
7/8 Hp PMDC motor
Power requirement:
15 amp minimum circuit on 115 VAC, 60 Hz current
English
All manuals and user guides at all-guides.com
Components and Description
Controls and Functions
suction tube.
in PRIME position.
materials only).
when set to PRIME. The arrows on the PRIME/SPRAY knob shows the rotation directions for
PRIME and SPRAY.
The PRIME/SPRAY knob is also used to relieve pressure built up in the spray hose (see Pressure
Relief Procedure, page 7).
materials. The Sureflo™ valve is activated automatically every time you turn the ON/OFF switch
ON.
button on the bottom of the sprayer.
Tools Needed for Assembly
• Two adjustable wrenches
• Extension cord (refer to Important electrical
Information, page 3).
Specifications
Generator power requirement:
8000 Watt
Safety features:
Spray gun trigger lock and pressure diffuser; built-in tip
safety guard; PRIME/SPRAY knob for safe pressure
release.
Capability:
Sprays a variety of paints, primers, stains, preservatives
and other nonabrasive materials, including pesticides and
liquid fertilizers.
This pump should not be used with textured materials,
block filler, or asphalt sealer.
4
Publicidad
