Publicidad
Idiomas disponibles
Idiomas disponibles
EN //
USER GUIDE
C L E A N I N G
HOW TO CLEAN
PREPARATION:
Food grade vinegar (white vinegar, apple vinegar, etc.)
WHY NEED TO CLEAN:
Normally tap-water contains minerals which can cause limescale. When the water is heated to a certain
temperature, the limescale will appear on the heater or surface of the machine, this could affect the
performance of the machine. We suggest you clean the machine after every 20 uses or 200 hours.
HOW TO CLEAN:
1
Mix 75% water and 25% vinegar and pour it into a container until you reach the Max line of the machine.
2
Turn on the machine, set the working temperature to 80°C/176°F) and set the time 3 hours (03:00) then
press the Start/Stop button. When the machine reaches the preset temperature press the Start/Stop
button to start the timer.
3
When the timer indicates 00:00, stop the machine and turn off the power, unplug and let the machine cool.
4
Drain out the water from the container and use fresh water to clean the device.
T RO U B L E S H O OT I N G
If the appliance does not function properly, please check the below table for the solution. If you are still unable
to solve the problem, please contact the supplier/service provider.
Error
H20
E02
12
Possible Cause
The water level is lower than the
lowest water level
1. The heating pipe isn't normal;
2. The internal wiring of the machine
isn't normal;
3. The temperature sensor isn't normal
Troubleshooting
Turn off the machine power, add the
right amount of water to the container.
Need to ask a professional to repair
Publicidad
