Publicidad
Idiomas disponibles
Idiomas disponibles
Trigger a Sweep or Burst
You can select one of four different types of triggers from the front panel for sweeps and bursts:
– Immediate or "automatic" (default): Instrument outputs continuously when sweep or burst mode is selected.
– External : Triggering controlled by front panel Ext Trig connector.
– Manual : Initiates one sweep or burst each time you press [Trigger] . Continue pressing [Trigger] to re-trigger
instrument.
– Timer : Issues one or more triggers a fixed time amount apart.
If sweep or burst is on, pressing [Trigger] displays the trigger menu. An illuminated [Trigger] key (solid or blinking)
indicates that one or both channels are awaiting a manual trigger. Solid illumination occurs when the trigger menu
is selected, and flashing illumination occurs when the trigger menu is not selected. The [Trigger] key is disabled
when the instrument is in remote.
Pressing [Trigger] when it is solidly illuminated causes a manual trigger. Pressing [Trigger] when it is flashing selects
the trigger menu; a second press causes a manual trigger.
Store or Retrieve the Instrument State
You can store instrument states in any number of state files, (extension .sta). You can do this for backup purposes,
or you can save your state to a external USB flash drive and load it on another instrument to have instruments with
matching configurations. A stored state contains the selected function, frequency, amplitude, DC offset, duty cycle,
symmetry, and any modulation or burst parameters in use. The instrument does not store volatile arbitrary
waveforms.
Store Settings
Store Settings allows you to browse to a directory and specify a file name, and to choose whether you want to store
a state file internally or to an external USB flash drive.
Keysight EDU33210 Series User's Guide
65
Publicidad
