To store (save) the current instrument state:
1. Select the desired storage destination.
Press [System] > Store/Recall > Store Settings > Destination .
If choose to store the instrument state in the instrument's non-volatile internal memory, select
2.
If you choose to store the state file (.sta) in a connected external USB flash drive, select
Make sure to connect a USB flash drive before proceed. If a USB flash drive is not connected, the
menus under Destination Int | Ext will be grayed out.
66
Int
. Proceed to step
Ext
. Skip to step 3.
Keysight EDU33210 Series User's Guide