Recall Settings
Recall Settings allows you to browse to the state in the internal memory or browse to the instrument state file (.sta
format) in the external USB flash drive to be recalled.
The state file you recall must be from same instrument model.
To restore (retrieve) a stored instrument state:
1. Select the desired recall source.
Press [System] > Store/Recall > Recall Settings > Source .
If choose to recall an instrument state file from the instrument's non-volatile internal memory, select
step 2.
If you choose to recall a state file (.sta) from a connected external USB flash drive, select
2. Select the internal storage location to recall from.
Press Recall , and select between State 0, State 1, State 2, State 3, or State 4. Skip to step 4.
3. Select the desired external storage location to recall from.
Press Browse and use the front panel knob and arrow keys to navigate to the desired state file (*sta) that you would
like to recall. Press Select when done.
4. Recall the selected instrument state.
Press Recall .
Keysight EDU33210 Series User's Guide
Int
. Proceed to
Ext
. Skip to step 3.
69