Teac AD-850-SE Manual Del Usuario página 26

ATTENTION
Never turn the unit off or disconnect a USB flash drive when
it is being accessed, for example, during writing, playback,
recording or the erasure of files.
Doing so could damage the unit and the connected USB flash
drive.
1
Press the SOURCE button repeatedly to select "USB".
< When a different source is selected, starting USB playback
automatically selects the USB mode .
2
Connect an external USB flash drive to the USB port of
this unit.
Reading the USB flash drive takes a few seconds .
USB flash drives with especially large capacities might take more
time .
When "READING" is shown while the drive is being read, pressing
buttons will have no effect .
< If no MP3 file is on the USB flahs drive, "NO MUSIC FILE" is
displayed .
26
Listening to files on a USB flash drive
3
Press the USB Play ( t ) button to start playback.
< When playback of all the files has finished, the unit stops
automatically .
< MP3 files that are not put in folders are automatically put in the
"ROOT" folder . Playback starts from the first file in the ROOT
folder .
< See page 40 for information about the playback order of MP3
files .
Pausing playback temporarily
Press the USB Pause (J) button during playback to stop playback
at the current position .
To resume playback, press the USB Pause (J) button again or press
the USB Play (t) button .