Teac AD-850-SE Manual Del Usuario página 33

6
Press the RECORD TAPE button again to start recording.
When recording from an external source, you must also start
playback of the source .
If the recording source is a CD or USB flash drive, that source will
automatically start playing back .
o Pressing either the TAPE Pause (9) or TAPE Play (t) button
will start recording .
The red indicator above the RECORD TAPE button and the
icon on the display stop blinking .
< To pause recording, press the TAPE Pause (J) button . Press the
button again to resume recording .
Pressing the TAPE Play (t) button will also resume recording . You
can also resume recording by pressing the source playback but-
ton if the recording source is a CD or USB flash drive .
Recording from a CD or a USB flash drive
When source playback stops, recording also automatically stops .
To stop recording, press the TAPE Stop (H) button . Doing this
also stops playback of the recording source .
Recording from an external source
When source playback stops, recording does not automatically
stop . Press the TAPE Stop (H) button to stop recording .
Erasing recordings
When you make a recording, the tape is overwritten (the previous
recording is erased) . You can erase a tape recording by setting the
recording level to MIN and recording silence .
1
Press the TAPE RECORD button to start recording
standby.
2
Set the REC LEVEL control to the minimum MIN position.
3
Press the TAPE RECORD button to start erasing (by
recording silence).
33