Teac AD-850-SE Manual Del Usuario página 31

Erasing a file
1
Select the file that you want to delete (page 27).
2
Press the ERASE button.
"Erase File?" appears on the display .
3
Within 6 seconds, press the ERASE button again.
"Erasing" appears on the display, the file currently being played is
erased, and playback stops .
Recording on a cassette tape
This unit can record sound from a CD, USB flash drive, or connected
external device to a cassette tape .
You can record on Normal (type ) and Chrome (type ) tapes with
this unit . Metal (type ) cannot be recorded with this unit .
o You can mix in the sound of a mic connected to this unit when
recording (page 34) .
< This unit can also record to a USB flash drive, but it cannot record
to both USB flash drive and tape at the same time .
ATTENTION
Never turn the power off or disconnect the power cord during
recording. Doing so could damage this unit and connected
equipment.
1
Put a cassette tape in the compartment.
< If the erasure prevention tabs of the cassette tape have been
broken off, put pieces of adhesive tape over the hole(s) .
2
Press the SOURCE button repeatedly to select the source
to be recorded (CD, USB, or LINE).
Continued on the next page
31