Publicidad
Idiomas disponibles
Idiomas disponibles
How to Install Your Switch Cover Assembly
1.
Disassemble switch cover assembly from switch
housing removing four screws. Retain these screws
for Step 4. (Figure 1)
2.
Remove one of the three screws in the support
bracket of motor. Slightly loosen the remaining two
screws. Assemble the switch housing to the support
bracket using the two key slots in the switch housing.
Replace the third screw and securely tighten all three
screws. (Figure 2)
3.
Securely attach 3-pin connector and 2-pin connector
from motor assembly to wiring harness socket within
switch cover assembly. (Figure 3)
4.
Assemble the switch cover assembly onto the
switch housing using the previously removed
screws and securely tighten all screws. (Figure 4)
Switch Housing
Switch Housing
Motor
Assembly
Switch Cover Assembly
Switch Housing
13
Switch Cover
Figure 1
Assembly
Figure 2
Figure 3
Switch Cover
Assembly
Figure 4
Publicidad
