Dräger X-act 7000 Instrucciones De Uso página 21

Inspection
Inspections and maintenance carried
out by specialists.
Information on troubleshooting, see Technical Manual 9300160:
Test Tube Manual: draeger.com/tubeshandbook
5.2 Cleaning
WARNING
Damage to the device caused by liquids!
Liquids in the device and at the sensors may damage the device.
► Do not immerse the device in any liquid. Do not use any cleaning agents
that contain alcohol, lemon or solvent.
The device will need to be cleaned if one of the following situations arises:
Instructions for use |
X-act
Interval
Every 12 months
®
7000
– Contamination of the housing openings (gas inlet, gas outlet and retainer for
Dräger MicroTubes, mini USB port)
– Contamination of the keypad
To clean the device, wipe it down with a damp cloth and, while doing so, wipe
the dirt away from the housing openings.
When cleaning, make sure that no cleaning agent enters the gas inlet.
6 Storage
Store the X-act 7000 carefully, protected against moisture and direct sunlight.
7 Disposal
This product must not be disposed of as household waste. This is indi-
cated by the adjacent icon.
You can return this product to Dräger free of charge. For information
please contact the national marketing organisations and Dräger.
Batteries must not be disposed of as household waste. They are there-
fore marked with the adjacent symbol. Dispose of batteries and
rechargeable batteries at battery collection centers as specified by the
applicable regulations.
8 Technical data
Ambient conditions
Operation:
Temperature
Air pressure
Relative humidity
Storage:
Temperature
Air pressure
Storage
-20 °C to +50 °C (-4 °F to +122 °F)
700 hPa to 1300 hPa
0 to 95 % RH (non-condensing)
-20 °C to +55 °C (-4 °F to +131 °F)
700 hPa to 1300 hPa
| en
21