Descargar Imprimir esta página

Dyna-Glo Signature DGSS675CB-D Manual De Instrucciones página 15

Ocultar thumbs Ver también para Signature DGSS675CB-D:

Publicidad

Idiomas disponibles

Idiomas disponibles

CARE AND MAINTENANCE
AFTER USE SAFETY AND MAINTENANCE
WARNING
• Use caution when lifting and moving the unit to avoid strain injuries.
Two people are recommended to lift or move the unit.
• DO NOT store the unit near gasoline or other combustible liquids or where combustible vapors
may be present. Keep the area around the appliance clear and free of combustible materials
and vapors.
• DO NOT store this appliance in an area accessible to children or pets. Store the appliance in a dry,
protected location.
• DO NOT allow anyone to conduct activities around the appliance following use until it has cooled.
It is hot during operation and remains hot for a period of time following use.
• DO NOT leave hot ashes unattended until the appliance cools completely.
• The grill becomes extremely hot – allow the appliance to cool completely before handling. Allow the
grill to cool before removing and cleaning the grease cup.
• Dispose of cold ashes by wrapping them in heavy-duty aluminum foil and putting them in a
noncombustible container.
• If you must dispose of the ashes in less time than it takes for them to completely cool, remove the
ashes using heat-resistant gloves, along with Dyna Glo ash scoop (if equipped), metal tongs, or fire
place shovel. Place the ashes in aluminum foil. Completely soak the ashes with water before
disposing of them in a noncombustible container.
CAUTION: All care and maintenance procedures are to be performed while the
unit is completely cooled.
Clean the cooking grates with hot, soapy water. Rinse and dry thoroughly. You may prefer to coat the
cooking grates lightly with cooking oil or cooking spray.
To clean the inside and outside of the grill body, simply use a damp cloth.
Spray-washing with a water hose is not recommended. Moisture should be wiped away and not
allowed to stand inside or on top of the unit. Once cleaned, you may prefer to lightly coat the
interior of the grill body with cooking oil or cooking spray.
If rust is present on the exterior surface of the unit, clean the area with steel wool or emery cloth and
use heavy-duty, heat-resistant paint.
NEVER apply additional paint to the interior of the unit. If rust is present on the interior of the grill,
clean it thoroughly with steel wool or emery cloth and lightly coat the area with cooking oil or cooking
spray to help minimize recurring rust.
To protect your unit from weather conditions, always keep it covered while not in use.
15

Publicidad

loading

Este manual también es adecuado para:

Signature serieSignature dgss675cb