OHAUS 3000 Serie Instrucciones De Montaje página 155

3000 Series Indicators
3.4.5 Graduation
Set the scale readability.
0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20.
NOTE: Not all settings are available for each capacity. Refer to the Setup Table 3.3 for available settings.
3.4.6 Power On Unit
Set the unit that will be active at power on.
oz, lb, g, kg, lb:oz or
Auto (last unit in use when power was turned off.)
3.4.7 Zero Range
Set the percentage of scale capacity that may be zeroed.
0% = zeroing disabled
2% = zero up to 2 percent of capacity
100% = zero up to full capacity
3.4.8 End Setup
Advance to the next menu.
3.5 Readout Menu
Enter this menu to customize display functionality.
3.5.1 Reset
Set the Readout menu to factory default settings.
No = not reset
Yes = reset
If the Legal for Trade menu item is set to ON, the Stable Range, Averaging Level, Auto Zero Tracking and Auto
Off settings are not reset.
Reset: No, Yes
Filter Level Lo, Med, Hi
Auto Zero Tracking Off, 0.5d, 1d, 3d
Backlight Off, On, Auto
Auto Shut Off Off
End Readout Exit READOUT menu
EN-21
•
•
•