Gladiator GCB800 Manual Del Usuario página 11

1) In case of disassembling and assembling the main cover, screw should be tightened in specific torque of1.5N.m (15.3kgf.cm)
2) In case of disassembling and assembling the main cover by over tightening torque, the parts of MCCB can be damaged.
1) Install guide wire, using supplied hardware.
2) Please put the wires inside the guide wire parts to arrange those.
Installation Instructions
Caution
: Please don't
place the wires below
the guide line
10P CONNECTOR
12P CONNECTOR
<Fig. 15 > Assembly of wire ass'y and withdrawal of wire
CAUTION
INNER ACCESSORY
GUIDE WIRE
8.85 lb-in(0.9 N·m)
<Fig. 16> Arrangement of wires
- 9 -
- In case of the wiring of Earth Leakage ≥30A
Drawing No. Part Name
76671176312 WIRE ASS'Y AE AX PX SX OCR
No. 15, B1 No. 16, B2
WIRE ASS'Y,
OCR
GCB800/1200
User wiring
E1, E2
WIRE ASS'Y OCR