Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
HMF115
INSTRUCTION MANUAL
Para Español ver página 18
Want to watch a
video that shows
how easy this DIY
project will be?
Watch it now at:
SANUS.com/2943
WE'RE HERE TO HELP
Recommended placement
Check it out at:
SANUS.com/2933
Get it right the
first time.
HeightFinder
™
shows you
where to drill.
Call us at:
888-384-1115
Our US-based
install experts
are standing
by to help.
Or, chat at:
SANUS.com/chatSH
Publicidad
Manuales relacionados para Sanus HMF115
Resumen de contenidos para Sanus HMF115
- Página 1 HMF115 INSTRUCTION MANUAL Para Español ver página 18 WE’RE HERE TO HELP Want to watch a Get it right the Our US-based Recommended placement video that shows first time. install experts how easy this DIY HeightFinder are standing ™ project will be? shows you by to help.
- Página 2 Before getting started, let’s make sure this mount is perfect for you! Does your TV No — Perfect! (including accessories) 50 lb Yes — This mount is NOT compatible. Visit MountFinder.sanus.com or call weigh more than (22.6 kg) 50 lb (22.6 kg) ? 888-384-1115 to find a compatible mount.
- Página 3 Dimensions TV INTERFACE 15.75in 400mm 3.94in 100mm 15.75in 7.87in 400mm 200mm 11.81in 3.94in 300mm 100mm WALL PLATE TOP VIEW - EXTENDED SIDE VIEW - EXTENDED 5deg 4.01in 15deg 101.9mm DOWN 45deg 45deg 8.27in 9.92in 210mm 251.9mm SIMULATED 46" FLAT SCREEN TV 0.33in 8.4mm 15.02in...
- Página 4 Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
- Página 5 STEP 2 Parts and Hardware STEP 2B: Concrete Installation Kit CMK1 [NOT INCLUDED] Contact Customer Service at 888-384-1115 to inquire about the CMK1 Concrete Installation Kit. Concrete Anchor (qty. 2) Fischer UX10 x 60R Anchor Lag Bolt Wall Plate Arm Assembly Template (qty.
- Página 6 STEP 1 Attach TV bracket to TV 1.1 Measure Your TV Hole Pattern 1.2 Assemble Your TV bracket Based on your TV hole pattern measurements Measure the width and height of your ), determine your TV bracket TV hole pattern in cm. configuration: A, B, C, D or E.
- Página 7 For TV Hole Pattern For TV Hole Pattern For TV Hole Pattern Measurements Measurements Measurements (Dimensions in cm) (Dimensions in cm) (Dimensions in cm) 40.0 x 30.0 40.0 x 20.0 20.0 x 40.0 40.0 [15.75] 20.0 40.0 [7.87] [15.75] 30.0 20.0 [11.81] [7.87]...
- Página 8 1.3 Select TV Screw Diameter 1.4 Select TV Screw Length Only one size fits your TV. If your TV included inset For flat-back TVs, Spacers supplied for: spacers or wall mount adapters, no spacers use them ● Round (irregular) back TVs UNDER the required.
- Página 9 1.5 Attach TV Bracket Position your TV bracket configuration (A, B, C, D or E) onto your TV, making sure the bracket is both centered and level over your TV hole pattern. NOTE: The hanging tab on TV bracket must be oriented toward the top of the TV. Secure the TV bracket using your selection: screw/washer or screw/washer/spacer.
- Página 10 STEP 2A Attach Wall Plate to Wall Wood Stud Installation CAUTION: Avoid potential personal injury or property damage! ● Drywall covering the wall must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½ x 3 ½ in. (38 x 89 mm) Locate your stud.
- Página 11 Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove template IMPORTANT: Be sure to drill into the center of the stud. IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Install arm assembly using two lag bolts .
- Página 12 STEP 2B Attach Wall Plate to Wall Solid Concrete / Concrete Block Installation CAUTION: Avoid potential personal injury or property damage! Concrete Installation Kit CMK1 is not included (see page 5) Contact Customer Service at ● Mount arm assembly directly onto concrete surface (no wall covering) 888-384-1115 to inquire about the additional ●...
- Página 13 Remove the template and insert two anchors (Fischer UX 10 x 60R - included in the Concrete Installation Kit CMK1*). CAUTION: Be sure the anchors are seated flush with the concrete surface. Install arm assembly using two lag bolts . Tighten the lag bolts only until they are pulled firmly against the wall plate. CAUTION: Improper use could reduce the holding power of the lag bolt.
- Página 14 STEP 3 Hang TV onto Wall Plate HEAVY! You may need assistance with this step. Install the nut cap on arm assembly Fold first section of the arm of arm assembly against the wall to provide stability.
- Página 15 Hang the TV onto the arm of arm assembly by first hooking the hanging tab , then resting the TV into place. Lock the TV to the arm assembly with locking screw and washer IMPORTANT: This locking screw must be installed to secure the TV onto the arm assembly...
- Página 16 Manage Cables Cables can be routed through the cable channel on the top and bottom of the arm assembly for a cleaner look.
- Página 17 TV Adjustments TILT ADJUSTMENT LEVEL ADJUSTMENT REMOVING THE TV HEAVY! You may need Your TV should adjust easily when To adjust the leveling of your TV, loosen the assistance with this step. moved, then stay in place. locking screw , level your TV, then tighten If your TV is too loose or too tight, locking screw Disconnect the cables from your TV.
- Página 18 ¿Su televisor pesa No — ¡Perfecto! más de 22,6 kg 22,6 kg , incluidos (50 libras) Sí — Este soporte NO es compatible. Visite Mountfinder.Sanus.com o llame al 888-384-1115 para encontrar (50 lbs.) los accesorios? un soporte compatible. ¿Tabiques ¿De qué está...
- Página 19 ESPAÑOL Dimensiones Ver página 3 Piezas y accesorios suministrados Ver página 4 ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;...
- Página 20 ESPAÑOL 1,3 Seleccione el diámetro de los tornillos para el televisor Enrosque manualmente los tornillos en los encastres roscados del dorso del televisor a fin de determinar qué diámetro de tornillos (M4, M6 o M8) utilizar. 1,4 Seleccione el largo de los tornillos para el televisor : Si el dorso del televisor es plano, no se requieren espaciadores : Los espaciadores y los tornillos largos se proporcionan para:...
- Página 21 ESPAÑOL Con una mecha de 5.5 mm (7/32'') de diámetro, realice los orificios guía. Retire la plantilla de placa mural IMPORTANTE: Asegúrese de perforar el centro del montante. IMPORTANTE: Los orificios guía deben realizarse hasta una profundidad de 75 mm (3''). Instale el módulo de la placa mural usando dos tornillos tirafondo .
- Página 22 ESPAÑOL PASO 3 Colgar el televisor en la placa mural Ver página 14 ¡ELEMENTO PESADO! Es posible que necesite ayuda en este paso. Instale la la tapa en del módulo de la placa mural Pliegue la primera sección del brazo del módulo de la placa mural contra la pared para dar mayor estabilidad.
- Página 23 ESPAÑOL Ajustes del televisor Ver página 17 AJUSTE DE LA INCLINACIÓN AJUSTE DEL NIVEL El televisor debe acomodarse fácilmente al moverlo, y luego Para ajustar la nivelación de su televisor, afloje el tornillo de quedar en su lugar. seguridad , nivele el televisor, y luego ajuste el tornillo de seguridad Si el televisor está...
- Página 24 ©2020 Legrand AV Inc. All rights reserved. Sanus is a division of Legrand. SANUS and the SANUS Home logo are registered trademarks. Legrand AV Inc. • 6436 City West Parkway • Eden Prairie, MN 55344 USA...