Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 2B Attach Wall Plate to Wall
CAUTION:
Avoid potential personal injury or property damage!
●
Mount arm assembly
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
1.
Position the template
2.
Drill two pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
1
12
directly onto concrete surface (no wall covering)
08
on the wall at your desired height. Level the template and mark the hole locations.
07
07
Solid Concrete / Concrete Block Installation
Concrete Installation Kit CMK1 is not included
(see page 5) Contact Customer Service at
888-384-1115 to inquire about the additional
hardware.
2
07
3 in. (75 mm)
3/8 in.
(10 mm)
Publicidad
