Publicidad
Idiomas disponibles
Idiomas disponibles
SYMBOLS
SERVICE
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to your nearest
AUTHORIZED SERVICE CENTER for repair. When servic-
ing, use only identical replacement parts.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses
with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked
to comply with ANSI Z87.1.
WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemi-
cals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.
FEATURES
PRODUCT SPECIFICATIONS
Blade Diameter .......................................................6-1/2 in.
Blade Arbor ............................................................... 5/8 in.
Cutting Depth at 0º .................................................2-1/8 in.
kNOW YOUR CIRCULAR SAW
See Figure 1, page 15.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BEVEL ADJUSTMENT kNOB
The bevel adjustment knob allows you to set the circular
saw for bevel cuts from 0° to 50°.
BLADE WRENCH STORAGE
Conveniently stores your blade wrench for quick blade
changes.
DEPTH ADJUSTMENT kNOB
The depth adjustment knob adjusts the depth of cut from
0 in. to 2-1/8 in.
SAVE THESE INSTRUCTIONS
7 - English
WARNING:
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly and
understand completely the operator's manual.
If you do not understand the warnings and
instructions in the operator's manual, do not use
this product. Call RIDGID
assistance.
Cutting Depth at 45º ...............................................1-5/8 in.
No Load Speed ..................................... 4,400 r/min. (RPM)
Motor .................................................................. 18 Volt DC
LED WORkLIGHT
The LED worklight, located below the spindle lock, illumi-
nates when the lock-off button is activated. This provides
extra light for increased visibility.
LOCk-OFF BUTTON
The lock-off button reduces the possibility of accidental
starting.
SPINDLE LOCk
The spindle lock allows you to secure the blade when turn-
ing the blade screw.
WIDTH OF CUT SCALE
When making straight cross cuts or rip cuts, the scale can
be used to measure up to 5 in. on the right side of the blade,
and up to 1 in. on the left side of the blade.
customer service for
®
Publicidad
