Short/Long Messages; Gps Report - Kenwood TK-5220 Manual De Instrucciones

■ Reviewing Messages in the Stack Memory
1 Press the key programmed as Stack, or press and hold
the key programmed as Selcall, Status, or Selcall +
Status to enter Stack mode.
• The last received message is displayed.
2 Press
• Message types are identifi ed as follows:
I: Caller ID, S: Status Message, M: Short Message
• Press and hold
information as follows:
ID Name > Status/Short Message > Channel > Time Stamp
3 Press
• To delete the selected message, press
confi rm the deletion, press
• To delete all messages, press and hold
1 second. To confi rm the deletion, press

SHORT/LONG MESSAGES

Received short messages are displayed the same as Status
messages and are stored in the same stack memory.
To send short messages, and to send and receive long
messages, you must connect the transceiver to a PC. Ask your
dealer for details.

GPS REPORT

To send your location data, you must fi rst connect a GPS unit to
the transceiver. Once connected, press the key programmed as
Send the GPS data, or access the Menu {page 12}. If set up
by your dealer, GPS data may be automatically transmitted at a
preset time interval.
/ to select the desired message.
for 1 second to cycle the display
to return to normal operation.
or #. To
or .
or # for
or .
19