Descargar Imprimir esta página

Kenwood KHC29.W0SI Instrucciones página 13

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 93
Flour
Different batches of flour vary
in the amount of liquid required.
The stickiness of the dough has
a direct effect on the load on the
machine. Keep the machine under
observation whilst the dough is
mixing.
Whisk
Important
Do not use the whisk for heavy
mixtures e.g. creaming fat and
sugar as you will damage it.
Best results achieved when eggs
are at room temperature.
Before whisking egg whites, make
sure there is no grease or egg yolk
on the whisk or the bowl.
Mayonnaise - for best results
scrape down the bowl after the
addition of the oil and run for a
further 10 secs at max speed.
Batter Mixes - add the flour to the
bowl first, then liquid and mix on
minimum speed to incorporate the
ingredients.
Electronic Speed Sensor
Control
Your mixer is fitted with an electronic
speed sensor control that is designed
to maintain the speed under different
load conditions, such as when kneading
bread dough or when eggs are added to
a cake mix.
You may therefore hear some variation
in speed during the operation as the
mixer adjusts to the load and speed
selected - this is normal.
Points to note:
Never exceed the maximum
capacities stated – you may
overload the machine.
Some movement of the mixer head
is normal when mixing heavy loads
such as bread dough.
If the mixer head is raised during
operation, the machine will continue
to operate. Always switch off before
raising the head.
The machine will not operate
unless all the outlet covers are
correctly fitted.
If you hear the machine labouring
either switch off and remove some
of the mixture or increase the speed.
Your mixer has been fitted with
a 'soft start' feature to minimise
spillage. However if the machine is
switched on with a heavy mixture in
the bowl such as bread dough, you
may notice that the mixer takes a
few seconds to reach the selected
speed.
Always remove attachments fitted
to the outlets before raising the
mixer head.
Using the Drive Outlets
High Speed Outlet
Lift off the high speed outlet cover
Ensure the medium outlet cover is
in place otherwise the appliance will
not operate.
Medium Speed Outlet
Lift off the medium speed outlet
cover
.
Ensure the high speed outlet cover is
in place otherwise the appliance will
not operate.
8
attachments
.
attachments

Publicidad

loading