Kenwood KHC29.W0SI Instrucciones página 14

To Use your Attachments
Refer to the relevant illustrations for
each attachment and see hint and tips
under each attachment section.
Plastic Blender
15
a
Blade unit
b
Sealing ring
c
Goblet
d
Filler cap
e
Lid
Glass Blender
16
a
Blade holder
b
Blade unit
c
Sealing ring
d
Goblet
e
Lid
f
Filler cap
Assemble the Blender as shown In
15
illustration and
Note: ensure the sealing ring is fitted
correctly or leaking will occur.
Lid Fitting
Plastic blender – turn clockwise to
15
lock.
Glass blender – push down to secure.
16
Hints and Tips
Do not process hot ingredients
When making mayonnaise, put
all the ingredients, except the oil,
into the blender. Then, with the
machine running, remove the filler
cap and add the oil slowly and
evenly.
Thick mixtures, e.g. pates and dips,
may need scraping down. If the
mixture is difficult to process, add
more liquid.
To blend dry ingredients - cut into
pieces, remove the filler cap, then
with the appliance running, drop
the pieces down one by one.
16
Food Processor
17
a
Small pusher
b
Large pusher
c
Feed tube
d
Lid
e
Bowl
f
Drive shaft
g
Knife blade
Discs (if supplied)
h
Thick slicing/grating disc
i
Thin slicing/grating disc
j
Extra fine grating disc
k
Thin julienne style chipper disc
l
Standard chipper disc
m
Extra thick grating disc
Assemble the Food Processor as shown
in illustration
1 Place the drive shaft onto the outlet.
2 Fit the bowl over the drive shaft with
the handle above the speed control
and turn clockwise until it locks into
position.
3 Fit either the knife blade, one of the
discs or the citrus juicer. The knife
blade and cutting section of the
discs are sharp so always handle
with care.
Hints and Tips
Cut meat, bread and vegetables
into 2cm cubes before processing.
Herbs are best chopped when
clean and dry.
Take care not to over process
when using the knife blade.
Do not use knife blade to chop ice
cubes or other hard foods such
as spices, they may damage the
attachment.
If adding almond essence or
flavouring avoid contact with
plastic as this may stain.
Discs
1 Choose which feed tube you want to
use. The pusher contains a smaller
feed tube for processing individual
items or thin ingredients.
9
17