Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Regular maintenance is necessary to ensure the proper operation
of the Damper system. Failure to conduct such routine maintenance
can jeopardize the ability of the Damper to introduce fresh air into the
home. Regular maintenance should include the following activities:
•
open to allow fresh air to enter.
•
before it enters the home.
•
venting the buildup of snow, leaves, or vegetation at the end cap.
•
tor inspect the Damper system for proper operation.
FREQUENTLY ASKED
QUESTIONS (FAQS)
1. What does the Automatic Make-Up Air
Damper do?
pathway for fresh air to enter a home from outdoors when a compatible
exhaust device is operating. The Damper opens when a range hood is
operating, thereby creating a known, controlled point for fresh air to enter
the home while air is being exhausted from the building by the range hood.
By operating in this manner, the Damper provides two key benefits for the
home:
•
allow fresh air into the home to replace air which is exhausted out of
the home.
•
is on, the Damper helps to avoid negative pressure conditions within
the home which may interfere with the proper operation of combustion
equipment within the home.
and without interfering with the proper operation of other home systems.
2. Does the "Damper" provide combustion air for combustion
appliances like a water heater or
a furnace?
No. The Damper helps to replace air which is exhausted by a compatible
indoors by a combustion appliance like a natural gas water heater, and it
this restriction is that the Damper is only open when the range hood that
it's connected to is operating. So there is no assurance that the Damper
would be open when other appliances, like a water heater, are operating.
these appliances.
3. How do I know if I need make-up air for my
range hood?
In some cases the local building code may tell you that make-up air is
necessary. For example, some codes specify that range hoods with
mechanical system to introduce make-up air.
In other cases, make-up air for a range hood is desirable regardless of
whether code requires it. This is especially true for:
•
•
easily find its way into the home through cracks, to replace air which is
exhausted out.
MODELS G6MD • G8MD • G10MD
•
(i.e. a water heater or natural draft fireplace), which are more
susceptible to improper venting if depressurization occurs in
the home.
In homes with any one of these factors make-up air is advised. And in
homes with more than one of these conditions make-up air for the range
hood is strongly advised.
4. What are the benefits of providing make-up air to replace air
-
which is exhausted out of the home by a range hood?
Range hoods are designed to pull out pollutants like cooking odors or
-
moisture at the source, so they don't linger in the home. Because these
from outdoors. Normally this make-up air enters the home through cracks
much more thoroughly so there are not as many cracks and openings.
Plus some exhaust fans like range hoods exhaust a lot more air than can
be replaced through normal cracks in the building shell.
By providing an intentionally designed opening for fresh air to replace
air which is exhausted out by the range hood, several important benefits
result:
•
it is also filtered
•
a home without being replaced by new fresh air, are prevented
•
replacement air is drawn into the home, improving ventilation
5. Does ASHRAE 62.2-2007 – "Ventilation and Acceptable Indoor
Air Quality in Low-Rise Residential Buildings" – require the use
of a make-up air damper?
ASHRAE 62.2-2007 does not specifically require make-up air dampers. In
a few limited circumstances, this standard does require that net exhaust
flows from a house be limited. For example, Section 6.4 of the standard
limits the net exhaust flow from a home's two largest exhaust appliances
if the home has atmospherically vented or solid-fuel burning appliances
located within the pressure boundary of the house. This standard is
available at www.ashrae.org.
6. Can I use the Automatic Make-Up Air Damper with other
equipment in my home?
hoods.
7. What are the different ways that the Damper can be installed in
my home?
The most common way to install the Damper is to connect it to a home's
central duct system. In this application, outside fresh air enters the home
through the Damper and is then routed and distributed through the home's
ducts.
8. What if my home doesn't have ducts?
Homes without ducts can still utilize the Damper to help replace air which
is exhausted from the home by the range hood.
9. What happens after a power outage?
The Damper system and the associated exhaust devices will not lose their
settings following a power outage. So the system will resume its normal
operation following a power outage, based on the settings it used prior to
the outage.
Page 8
99045116A
Publicidad
