Test The System - Broan G6MD Manual De Instrucciones

WIRE THE SYSTEM
Wire the system as shown.
MAKE-UP AIR DAMPER
24V 24V
TRANSFORMER
BLACK (LINE)
WHITE (COMMON)
GREEN (GROUND)
WIRING DIAGRAM
ONE DAMPER

TEST THE SYSTEM

Turn off the hood and check to see if the damper closes.
A qualified HVAC contractor should also ensure the proper operation and venting of all combustion equipment in the home.
FALSE TRIPPING
Under certain extreme conditions there could be false tripping of the damper (opening when the range hood blower is off). If false tripping
is encountered, place an in-line backdraft damper (not included) between the probe and the roof or wall cap.
MAKE-UP AIR DAMPER
PRESSURE
SWITCH
TRANSFORMER WIRING
24V 24V
WIRING DIAGRAM
MULTIPLE DAMPERS
24V CONTACTS
24V
20V
MODELS G6MD • G8MD • G10MD
MAKE-UP AIR DAMPER
24V
TRANSFORMER
Page 7
24V
PRESSURE
SWITCH
BLACK (LINE)
WHITE (COMMON)
GREEN (GROUND)