ETA Systems 350VA Manual Del Usuario página 19

ETA SYSTEMS - UNINTERRUPTIBLE POWER MANAGER
7. Push the new battery pack into place.
8. Replace the battery retaining bracket removed in step 3 and replace the screw(s) that secures it in
place.
9. Slide the front panel (removed in step 2) back on the front of the UPM taking care not to pinch or
damage the ribbon cable.
10. Replace the front cover screws and tighten.
9.0 – UPM WARRANTY
ETA SYSTEMS warrants its uninterruptible power managers or UPM (known hereafter as the "product") to
be free from defects in materials or workmanship for a period of five years from the date of shipment. ETA
SYSTEMS warrants the batteries used in the product to be free from defects in materials or workmanship for
a period of two years from the date of shipment. The product will be repaired or (at ETA SYSTEMS's option)
replaced at no charge during this warranty period. Product must be returned prepaid to the factory.
ETA SYSTEMS makes no warranties, expressed or implied, of merchantability, fitness for a particular
purpose, performance, condition, capacity or otherwise. ETA SYSTEMS is not liable for incidental or
consequential damages, monetary loss, loss of sales, or loss of business resulting from the failure or
malfunction of the product. Warranty is void on any product that is misused, misapplied, abused, altered or
repaired by any unauthorized personnel or where evidence of tampering exists. The foregoing constitutes
the sole and exclusive remedy of the purchaser and is in lieu of all other warranties. No greater degree of
liability is imposed on ETA SYSTEMS.
17