W&W Cycles RSD 45-775 Manual Del Usuario página 3

HOW TO USE
RSD Mid Controls
Item‑№ 45‑775, 45‑838
1. Disconnect battery, place securely on a lift or
side stand.
2. Remove the stock right side controls, disconnect
the brake line from the master cylinder and remo‑
ve the master cylinder from the controls.
NOTES:
An aftermarket brake line is required when instal‑
ling mid controls. Consult your HD service manu‑
al for specific instructions. Apply thread locking
compound to all bolts.
Right Side
Installation
3. Install the mid control
backing plate using the
supplied spacers and
bolts. Torque to 90 ‑ 100
in‑lbs (10 ‑ 11 Nm).
The .760" spacer is used in place of the .880" spa‑
cer if installing the RSD Pulley Cover.
© W&W Cycles AG, 2022-07-13, ID 132540, rev. 0.92, wwag.com
4. Remove the stock clevis from the master cylin‑
der.
5. Mount the master cylinder and supplied reser‑
voir bracket using the included hardware and spa‑
cers.
6. Install the new clevis to the master cylinder and
mount it to the brake pedal using the supplied
hardware. Torque to 17 ‑ 22 ft‑lbs (23 ‑ 30 Nm).
DE
EN
EN
ES
FR
IT
Page 1 of 2