W&W Cycles RSD 45-775 Manual Del Usuario página 4

HOW TO USE
7. Mount the reservoir to the mount, run the hose
to the master cylinder and trim to length. Install
the rear brake line and bleed the rear brake. Check
clearance between the brake pedal and exhaust
system. Adjust height if needed.
NOTE: Make sure the hose does not bind,
kink or touch the exhaust system.
© W&W Cycles AG, 2022-07-13, ID 132540, rev. 0.92, wwag.com
Left Side Installation
If you have a forward control model bike you will
need to purchase a HD mid control shift arm PN
34660‑04A.
1. Remove the three derby cover bolts at 6, 8, 10 o'
clock positions.
2. Install the backing plate using the provided spa‑
cers and bolts. Torque to 90 ‑ 100 in‑lbs (10 ‑ 11
Nm).
3. Adjust the shift lever height to your preference.
DE
EN
EN
ES
FR
IT
Page 2 of 2