Publicidad
Idiomas disponibles
Idiomas disponibles
warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
In addition to the warranty, D
WALT tools are covered by our:
E
1 YEAR FREE SERVICE
D
WALT will maintain the tool and replace worn parts
E
caused by normal use, for free, any time during the first year
after purchase.
TROUBLE!
WHAT'S WRONG?
Saw will not start
1. Saw not plugged in
2. Fuse blown or circuit breaker tripped
3. Cord damaged
4. Brushes worn out
Saw makes
1. Dull blade
unsatisfactory cuts
2. Blade mounted backwards
3. Gum or pitch on blade
4. Incorrect blade for work being done
Blade does not come up
1. Extension cord too light or too long
to speed
2. Low house current
Machine vibrates excessively
1. Saw not mounted securely to stand or
2. Stand or bench on uneven floor
3. Damaged saw blade
Does not make accurate
1. Miter scale not adjusted correctly
miter cuts
2. Miter pointer not adjusted correctly
3. Workpiece is not perpendicular to table
4. Workpiece moving
Material pinches blade
1. Cutting bowed material
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of
your D
WALT Power Tool, Laser, or Nailer for any reason,
E
you can return it within 90 days from the date of purchase
with a receipt for a full refund – no questions asked.
LATIN AMERICA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARNING LABEL REPLACEMENT: If your warning
labels become illegible or are missing, call 1-800-4-D
(1-800-433-9258) for a free replacement.
Please refer to the beginning of the manual for labels.
Troubleshooting Guide
BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS
work bench
WALT
E
WHAT TO DO
1. Plug in saw.
2. Replace fuse or reset circuit breaker.
3. Have cord replaced by authorized service center.
4. Have brushes replaced by authorized service center or replace them yourself. Refer to Brushes.
1. Replace blade. Refer to Changing or Installing a New Saw Blade.
2. Turn blade around. Refer to Changing or Installing a New Saw Blade.
3. Remove blade and clean with turpentine and coarse steel wool or household oven cleaner.
4. Change the blade type. Refer to Saw Blades under Accessories.
1. Replace with adequate size cord. Refer to Use Proper Extension Cord under Important Safety
Instructions.
2. Contact your electric company.
1. Tighten all mounting hardware. Refer to Bench Mounting.
2. Reposition on flat level surface. Refer to Familiarization.
3. Replace blade. Refer to Changing or Installing a New Saw Blade.
1. Check and adjust. Refer to Miter Scale Adjustment under Adjustments.
2. Check and adjust. Refer to Miter Pointer Adjustment under Adjustments.
3. Check and adjust fence. Refer to Fence Adjustment under Adjustments.
4. Clamp workpiece securely to fence or glue 120 grit sandpaper to fence with rubber cement.
1. Refer to Bowed Material under Special Cuts.
15
Publicidad
