Publicidad
Idiomas disponibles
Idiomas disponibles
outlet can be installed by an approved
electrician.
The power plug (A) is grounded and can be used with or
without a temporary adapter (B).
A
Use an adapter when the outlet (C) is not grounded. Use
the temporary adapter to connect the power plug to the
outlet that is not grounded. The tab for grounding screw
(D) on the adapter must be connected to a grounded
outlet box cover. You must use the metal screw (E) to
hold the adapter in position.
Do not use an adapter if the outlet (F) is grounded.
F
To do before you operate the product
WARNING:
the risk of injury, make sure that you attach
the product plug fully to the extension cable.
Do regular checks of the connection while
you operate the product to make sure that
it is fully attached. Do not use an extension
cable that makes a loose connection.
10
B
C
E
D
To prevent
Note:
The operation conditions are 800 m/2625 ft
maximum altitude, temperature between -10⁰C/14⁰F to
+40⁰C/104⁰F and humidity 85%.
Note:
Read the operator's manual of the attached
equipment carefully. If specified requirements or settings
are given for the dust extractor, make sure that you obey
these.
1. Read the operator's manual carefully and make sure
that you understand the instructions.
2. Do the daily maintenance. Refer to
schedule on page 17 .
3. Make sure that the work area is clean and bright.
4. Use personal protective equipment. Refer to
Personal protective equipment on page 7 .
5. Make sure that the product is installed correctly.
6. Make sure that the frequency and voltage shown on
the type plate agrees with the power supply voltage.
This is also applicable for the extension cables.
7. Attach the product cord (A) with the extension cable
(B) during operation to make sure that they stay
connected.
B
To attach the dust extraction hose
WARNING:
antistatic hose to prevent antistatic effects.
1. Open the hose connector.
Maintenance
A
Use an
1587 - 011 - 06.03.2023
Publicidad
