ALLIANCE SWD619N Instalación/Operación página 20

Installation
Thread hose couplings onto valve connections finger-
tight, then approximately
1/4 turn with pliers. DO NOT cross thread or
overtighten couplings.
Turn water on and check for leaks. If leaks are found,
retighten the hose couplings. Continue tightening and
rechecking until no leaks are found.
COLD
HOT
4
1 Water Faucet
2 Fill Hoses
3 Rubber Washer (Plain)
4 Filter Screens
Figure 4
18
1
3
2
TLW1976N
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
1
4
1 Water Supply Faucets
2 Cold Water Connection
3 Hot Water Connection
4 Water Fill Hoses
Figure 5
IMPORTANT: Hoses and other natural rubber
parts deteriorate after extended use. Hoses may
develop cracks, blisters or material wear from the
temperature and constant high pressure they are
subjected to.
All hoses should be checked on a yearly basis for
any visible signs of deterioration. Any hose showing
the signs of deterioration listed above should be
replaced immediately. All hoses should be replaced
every five years.
2
WATER
MIXING
VALVE
3
SWD631N
SWD631N
801539