Toto TES201AB Serie Manual De Instalación Y Del Propietario página 23

[ For the TLK0700*G model ]
Clean the nozzle periodically as the soap cannot flow if the nozzle is clogged.
1. Unplug from the power outlet.
2. Use the hex key included to gently loosen
and remove the screw.
(Roughly 7 turns of the hex key.)
Caution
If you clean the nozzle in a sink, make sure to
cover the drain to prevent losing the small parts.
3. Pull out and remove the nozzle after
loosening the screw.
4. Pinch the filter and pull it out from the nozzle.
5. Leave the nozzle and the filter to soak in hot
water for a few minutes.
Note
This makes it easier to remove any soap that
has adhered to the nozzle.
PERIODIC MAINTENANCE - Nozzle
Nozzle
Make sure to fully insert the hex key
before loosening the screw. If the hex key
is not properly inserted, the screw socket
may be deformed and become unusable.
23
Screw
Loosen
Hex key
Gently pull upwards at
a slant
Remove
Filter