Toto TES201AB Serie Manual De Instalación Y Del Propietario página 27

PERIODIC MAINTENANCE - Nozzle
1. Pull out the power plug.
2. Turn the nozzle by hand to unlock.
3. Grab the projection on the nozzle with a
tool such as long-nose pliers and pull out
the nozzle and the filter.
4. Clean (Wash with water) the nozzle and the
filter.
Caution
If you wash the nozzle in a wash bowl, block
the drain outlet. This part is small and may be
lost.
Note
After washing them with water, wipe off
moisture with a dry soft cloth.
If you use hot water for cleaning, dirt is
washed off more easily.
5. After washing the nozzle and the filter,
mount them back again.
When mounting the nozzle, turn it by hand
so that it locks with the spill hole to the
lower side.
* The nozzle is made so as not to insert
reversely.
Note
After the nozzle has been mounted, turn on
the liquid soap, and make sure that water does
not leak from the outside of the nozzle.
(Continued)
Nozzle
Tool
● How to mount the nozzle
View from below
* Be sure to mount the nozzle so that the spill
hole comes to the lower side. Otherwise,
liquid soap may leak.
27
Unlock
O-ring
Filter
Spill ports