Toto TES201AB Serie Manual De Instalación Y Del Propietario página 24

PERIODIC MAINTENANCE - Nozzle
6. Remove the filter from the hot water, and
clean it with a soft brush.
Rinse the filter and dry it with a soft cloth.
7. Remove the nozzle from hot water. Use a
bent paper clip to remove any soap
clogging the 4 small holes at the soap inlet.
8. Attach the filter onto the nozzle when cleaning
is complete. Use the hex key to secure the
nozzle back onto the spout with the screw.
Insert the nozzle into the spout until the screw hole is
hidden.
Make sure the nozzle is fully secured and does not
come off.
Note
Activate the dispense to make sure no
leaking occurs.
(Continued)
Toothbrush
4 small holes
How to attach the nozzle
Caution
Always attach the nozzle with the
dispensing outlet facing downwards.
Otherwise the soap may spill everywhere.
Insert the nozzle
until the screw hole
is hidden
24
Filter
Bent paper clip